Download ready-to-print Chitubox profiles for the Zortrax Inkspire LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
NNBR | Standard Blend Resin, Red | 10.2s, bottom 100s | 13.8s, bottom 140s | 100 mm/min | 1s |
NNBB | Standard Blend Resin, Black | 10.6s, bottom 110s | 14.4s, bottom 140s | 100 mm/min | 1s |
NNBU | Standard Blend Resin, Unp. | 9.3s, bottom 90s | 12.6s, bottom 130s | 100 mm/min | 1s |
NIBR | Industrial Blend Resin, Red | 10.2s, bottom 100s | 13.8s, bottom 140s | 100 mm/min | 1s |
NIBB | Industrial Blend Resin, Black | 10.6s, bottom 110s | 14.4s, bottom 140s | 100 mm/min | 1s |
NIBU | Industrial Blend Resin, Unp. | 9.3s, bottom 90s | 12.6s, bottom 130s | 100 mm/min | 1s |
CB | Castable Blend Resin, Red | 10.2s, bottom 100s | 13.8s, bottom 140s | 100 mm/min | 1s |
NSW | Snow White Resin, White | 10.2s, bottom 100s | 13.8s, bottom 140s | 100 mm/min | 1s |
DB | Deep Black Resin, Black | 11.1s, bottom 110s | 15s, bottom 150s | 100 mm/min | 1s |
AG | Ash Grey Resin, Grey | 10.2s, bottom 100s | 13.8s, bottom 140s | 100 mm/min | 1s |
NC | Nano Clear Resin, Clear | 12.4s, bottom 120s | 16.7s, bottom 170s | 100 mm/min | 1s |
DCH | Dentifix-3D Casting HR Resin, Green | 10.6s, bottom 110s | 14.4s, bottom 140s | 100 mm/min | 1s |
DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 11.5s, bottom 110s | 15.6s, bottom 160s | 100 mm/min | 1s |
DMHS | Dentifix-3D Modelling HR Resin, Sand | 12s, bottom 120s | 16.1s, bottom 160s | 100 mm/min | 1s |
DMHG | Dentifix-3D Modelling HR Resin, Grey | 12s, bottom 120s | 16.1s, bottom 160s | 100 mm/min | 1s |
DMHC | Dentifix-3D Modelling HR Resin, Clear | 12.9s, bottom 130s | 17.3s, bottom 170s | 100 mm/min | 1s |
DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 15.5s, bottom 150s | 20.9s, bottom 210s | 50 mm/min | 2s |