Download ready-to-print Chitubox profiles for the Wanhao GR1 GADOSO REVOLUTION 1 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
NNBR | Standard Blend Resin, Red | 14s, bottom 140s | 18.9s, bottom 190s | 100 mm/min | 1s |
NNBB | Standard Blend Resin, Black | 14.6s, bottom 150s | 19.8s, bottom 200s | 100 mm/min | 1s |
NNBU | Standard Blend Resin, Unp. | 12.8s, bottom 130s | 17.3s, bottom 170s | 100 mm/min | 1s |
NIBR | Industrial Blend Resin, Red | 14s, bottom 140s | 18.9s, bottom 190s | 100 mm/min | 1s |
NIBB | Industrial Blend Resin, Black | 14.6s, bottom 150s | 19.8s, bottom 200s | 100 mm/min | 1s |
NIBU | Industrial Blend Resin, Unp. | 12.8s, bottom 130s | 17.3s, bottom 170s | 100 mm/min | 1s |
CB | Castable Blend Resin, Red | 14s, bottom 140s | 18.9s, bottom 190s | 100 mm/min | 1s |
NSW | Snow White Resin, White | 14s, bottom 140s | 18.9s, bottom 190s | 100 mm/min | 1s |
DB | Deep Black Resin, Black | 15.3s, bottom 150s | 20.6s, bottom 210s | 100 mm/min | 1s |
AG | Ash Grey Resin, Grey | 14s, bottom 140s | 18.9s, bottom 190s | 100 mm/min | 1s |
NC | Nano Clear Resin, Clear | 17.1s, bottom 170s | 23s, bottom 230s | 100 mm/min | 1s |
DCH | Dentifix-3D Casting HR Resin, Green | 14.6s, bottom 150s | 19.8s, bottom 200s | 100 mm/min | 1s |
DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 15.9s, bottom 160s | 21.4s, bottom 210s | 100 mm/min | 1s |
DMHS | Dentifix-3D Modelling HR Resin, Sand | 16.5s, bottom 160s | 22.2s, bottom 220s | 100 mm/min | 1s |
DMHG | Dentifix-3D Modelling HR Resin, Grey | 16.5s, bottom 160s | 22.2s, bottom 220s | 100 mm/min | 1s |
DMHC | Dentifix-3D Modelling HR Resin, Clear | 17.7s, bottom 180s | 23.9s, bottom 240s | 100 mm/min | 1s |
DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 21.3s, bottom 210s | 28.8s, bottom 290s | 50 mm/min | 2s |