Download ready-to-print Chitubox profiles for the Uniz Slash Mono LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

SKU
Resin name
0.05 mm layer
0.1 mm layer
Speed
Delay
NNBR Standard Blend Resin, Red 5s, bottom 50s 6.8s, bottom 70s 100 mm/min 1s
NNBB Standard Blend Resin, Black 5.2s, bottom 50s 7.1s, bottom 70s 100 mm/min 1s
NNBU Standard Blend Resin, Unp. 4.6s, bottom 50s 6.2s, bottom 60s 100 mm/min 1s
NIBR Industrial Blend Resin, Red 5s, bottom 50s 6.8s, bottom 70s 100 mm/min 1s
NIBB Industrial Blend Resin, Black 5.2s, bottom 50s 7.1s, bottom 70s 100 mm/min 1s
NIBU Industrial Blend Resin, Unp. 4.6s, bottom 50s 6.2s, bottom 60s 100 mm/min 1s
CB Castable Blend Resin, Red 5s, bottom 50s 6.8s, bottom 70s 100 mm/min 1s
NSW Snow White Resin, White 5s, bottom 50s 6.8s, bottom 70s 100 mm/min 1s
DB Deep Black Resin, Black 5.5s, bottom 50s 7.4s, bottom 70s 100 mm/min 1s
AG Ash Grey Resin, Grey 5s, bottom 50s 6.8s, bottom 70s 100 mm/min 1s
NC Nano Clear Resin, Clear 6.1s, bottom 60s 8.2s, bottom 80s 100 mm/min 1s
DCH Dentifix-3D Casting HR Resin, Green 5.2s, bottom 50s 7.1s, bottom 70s 100 mm/min 1s
DM+ Dentifix-3D Modelling HR+ Resin, Grey 5.7s, bottom 60s 7.7s, bottom 80s 100 mm/min 1s
DMHS Dentifix-3D Modelling HR Resin, Sand 5.9s, bottom 60s 7.9s, bottom 80s 100 mm/min 1s
DMHG Dentifix-3D Modelling HR Resin, Grey 5.9s, bottom 60s 7.9s, bottom 80s 100 mm/min 1s
DMHC Dentifix-3D Modelling HR Resin, Clear 6.3s, bottom 60s 8.5s, bottom 80s 100 mm/min 1s
DGP Dentifix-3D Gingiva Mask FLEX, Pink 7.6s, bottom 80s 10.3s, bottom 100s 50 mm/min 2s