Download ready-to-print Chitubox profiles for the Uniz Slash 2 Mono LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
| NNBR | Standard Blend Resin, Red | 5s, bottom 50s | 6.8s, bottom 70s | 100 mm/min | 1s |
| NNBB | Standard Blend Resin, Black | 5.2s, bottom 50s | 7.1s, bottom 70s | 100 mm/min | 1s |
| NNBU | Standard Blend Resin, Unp. | 4.6s, bottom 50s | 6.2s, bottom 60s | 100 mm/min | 1s |
| NIBR | Industrial Blend Resin, Red | 5s, bottom 50s | 6.8s, bottom 70s | 100 mm/min | 1s |
| NIBB | Industrial Blend Resin, Black | 5.2s, bottom 50s | 7.1s, bottom 70s | 100 mm/min | 1s |
| NIBU | Industrial Blend Resin, Unp. | 4.6s, bottom 50s | 6.2s, bottom 60s | 100 mm/min | 1s |
| CB | Castable Blend Resin, Red | 5s, bottom 50s | 6.8s, bottom 70s | 100 mm/min | 1s |
| NSW | Snow White Resin, White | 5s, bottom 50s | 6.8s, bottom 70s | 100 mm/min | 1s |
| DB | Deep Black Resin, Black | 5.5s, bottom 50s | 7.4s, bottom 70s | 100 mm/min | 1s |
| AG | Ash Grey Resin, Grey | 5s, bottom 50s | 6.8s, bottom 70s | 100 mm/min | 1s |
| NC | Nano Clear Resin, Clear | 6.1s, bottom 60s | 8.2s, bottom 80s | 100 mm/min | 1s |
| DCH | Dentifix-3D Casting HR Resin, Green | 5.2s, bottom 50s | 7.1s, bottom 70s | 100 mm/min | 1s |
| DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 5.7s, bottom 60s | 7.7s, bottom 80s | 100 mm/min | 1s |
| DMHS | Dentifix-3D Modelling HR Resin, Sand | 5.9s, bottom 60s | 7.9s, bottom 80s | 100 mm/min | 1s |
| DMHG | Dentifix-3D Modelling HR Resin, Grey | 5.9s, bottom 60s | 7.9s, bottom 80s | 100 mm/min | 1s |
| DMHC | Dentifix-3D Modelling HR Resin, Clear | 6.3s, bottom 60s | 8.5s, bottom 80s | 100 mm/min | 1s |
| DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 7.6s, bottom 80s | 10.3s, bottom 100s | 50 mm/min | 2s |
