Download ready-to-print Chitubox profiles for the Phrozen Sonic MEGA 8K Mono LCD ParaLED MSLA 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

SKU
Resin name
0.05 mm layer
0.1 mm layer
Speed
Delay
NNBR Standard Blend Resin, Red 5.1s, bottom 50s 6.9s, bottom 70s 100 mm/min 1s
NNBB Standard Blend Resin, Black 5.3s, bottom 50s 7.2s, bottom 70s 100 mm/min 1s
NNBU Standard Blend Resin, Unp. 4.7s, bottom 50s 6.3s, bottom 60s 100 mm/min 1s
NIBR Industrial Blend Resin, Red 5.1s, bottom 50s 6.9s, bottom 70s 100 mm/min 1s
NIBB Industrial Blend Resin, Black 5.3s, bottom 50s 7.2s, bottom 70s 100 mm/min 1s
NIBU Industrial Blend Resin, Unp. 4.7s, bottom 50s 6.3s, bottom 60s 100 mm/min 1s
CB Castable Blend Resin, Red 5.1s, bottom 50s 6.9s, bottom 70s 100 mm/min 1s
NSW Snow White Resin, White 5.1s, bottom 50s 6.9s, bottom 70s 100 mm/min 1s
DB Deep Black Resin, Black 5.6s, bottom 60s 7.5s, bottom 70s 100 mm/min 1s
AG Ash Grey Resin, Grey 5.1s, bottom 50s 6.9s, bottom 70s 100 mm/min 1s
NC Nano Clear Resin, Clear 6.2s, bottom 60s 8.4s, bottom 80s 100 mm/min 1s
DCH Dentifix-3D Casting HR Resin, Green 5.3s, bottom 50s 7.2s, bottom 70s 100 mm/min 1s
DM+ Dentifix-3D Modelling HR+ Resin, Grey 5.8s, bottom 60s 7.8s, bottom 80s 100 mm/min 1s
DMHS Dentifix-3D Modelling HR Resin, Sand 6s, bottom 60s 8.1s, bottom 80s 100 mm/min 1s
DMHG Dentifix-3D Modelling HR Resin, Grey 6s, bottom 60s 8.1s, bottom 80s 100 mm/min 1s
DMHC Dentifix-3D Modelling HR Resin, Clear 6.5s, bottom 60s 8.7s, bottom 90s 100 mm/min 1s
DGP Dentifix-3D Gingiva Mask FLEX, Pink 7.8s, bottom 80s 10.5s, bottom 100s 50 mm/min 2s