Download ready-to-print Chitubox profiles for the Phrozen Sonic Mighty 4K Mono LCD ParaLED MSLA 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
NNBR | Standard Blend Resin, Red | 4.6s, bottom 50s | 6.3s, bottom 60s | 100 mm/min | 1s |
NNBB | Standard Blend Resin, Black | 4.8s, bottom 50s | 6.5s, bottom 60s | 100 mm/min | 1s |
NNBU | Standard Blend Resin, Unp. | 4.2s, bottom 40s | 5.7s, bottom 60s | 100 mm/min | 1s |
NIBR | Industrial Blend Resin, Red | 4.6s, bottom 50s | 6.3s, bottom 60s | 100 mm/min | 1s |
NIBB | Industrial Blend Resin, Black | 4.8s, bottom 50s | 6.5s, bottom 60s | 100 mm/min | 1s |
NIBU | Industrial Blend Resin, Unp. | 4.2s, bottom 40s | 5.7s, bottom 60s | 100 mm/min | 1s |
CB | Castable Blend Resin, Red | 4.6s, bottom 50s | 6.3s, bottom 60s | 100 mm/min | 1s |
NSW | Snow White Resin, White | 4.6s, bottom 50s | 6.3s, bottom 60s | 100 mm/min | 1s |
DB | Deep Black Resin, Black | 5s, bottom 50s | 6.8s, bottom 70s | 100 mm/min | 1s |
AG | Ash Grey Resin, Grey | 4.6s, bottom 50s | 6.3s, bottom 60s | 100 mm/min | 1s |
NC | Nano Clear Resin, Clear | 5.6s, bottom 60s | 7.6s, bottom 80s | 100 mm/min | 1s |
DCH | Dentifix-3D Casting HR Resin, Green | 4.8s, bottom 50s | 6.5s, bottom 60s | 100 mm/min | 1s |
DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 5.2s, bottom 50s | 7.1s, bottom 70s | 100 mm/min | 1s |
DMHS | Dentifix-3D Modelling HR Resin, Sand | 5.4s, bottom 50s | 7.3s, bottom 70s | 100 mm/min | 1s |
DMHG | Dentifix-3D Modelling HR Resin, Grey | 5.4s, bottom 50s | 7.3s, bottom 70s | 100 mm/min | 1s |
DMHC | Dentifix-3D Modelling HR Resin, Clear | 5.8s, bottom 60s | 7.9s, bottom 80s | 100 mm/min | 1s |
DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 7s, bottom 70s | 9.5s, bottom 90s | 50 mm/min | 2s |