Download ready-to-print Chitubox profiles for the Peopoly Phenom XXL MSLA LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
NNBR | Standard Blend Resin, Red | 23.6s, bottom 240s | 31.9s, bottom 320s | 100 mm/min | 1s |
NNBB | Standard Blend Resin, Black | 24.6s, bottom 250s | 33.3s, bottom 330s | 100 mm/min | 1s |
NNBU | Standard Blend Resin, Unp. | 21.6s, bottom 220s | 29.1s, bottom 290s | 100 mm/min | 1s |
NIBR | Industrial Blend Resin, Red | 23.6s, bottom 240s | 31.9s, bottom 320s | 100 mm/min | 1s |
NIBB | Industrial Blend Resin, Black | 24.6s, bottom 250s | 33.3s, bottom 330s | 100 mm/min | 1s |
NIBU | Industrial Blend Resin, Unp. | 21.6s, bottom 220s | 29.1s, bottom 290s | 100 mm/min | 1s |
CB | Castable Blend Resin, Red | 23.6s, bottom 240s | 31.9s, bottom 320s | 100 mm/min | 1s |
NSW | Snow White Resin, White | 23.6s, bottom 240s | 31.9s, bottom 320s | 100 mm/min | 1s |
DB | Deep Black Resin, Black | 25.7s, bottom 260s | 34.6s, bottom 350s | 100 mm/min | 1s |
AG | Ash Grey Resin, Grey | 23.6s, bottom 240s | 31.9s, bottom 320s | 100 mm/min | 1s |
NC | Nano Clear Resin, Clear | 28.7s, bottom 290s | 38.8s, bottom 390s | 100 mm/min | 1s |
DCH | Dentifix-3D Casting HR Resin, Green | 24.6s, bottom 250s | 33.3s, bottom 330s | 100 mm/min | 1s |
DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 26.7s, bottom 270s | 36s, bottom 360s | 100 mm/min | 1s |
DMHS | Dentifix-3D Modelling HR Resin, Sand | 27.7s, bottom 280s | 37.4s, bottom 370s | 100 mm/min | 1s |
DMHG | Dentifix-3D Modelling HR Resin, Grey | 27.7s, bottom 280s | 37.4s, bottom 370s | 100 mm/min | 1s |
DMHC | Dentifix-3D Modelling HR Resin, Clear | 29.8s, bottom 300s | 40.2s, bottom 400s | 100 mm/min | 1s |
DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 35.9s, bottom 360s | 48.5s, bottom 480s | 50 mm/min | 2s |