Download ready-to-print Chitubox profiles for the Longer Orange 30 LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
NNBR | Standard Blend Resin, Red | 17.4s, bottom 170s | 23.5s, bottom 230s | 100 mm/min | 1s |
NNBB | Standard Blend Resin, Black | 18.1s, bottom 180s | 24.5s, bottom 240s | 100 mm/min | 1s |
NNBU | Standard Blend Resin, Unp. | 15.9s, bottom 160s | 21.4s, bottom 210s | 100 mm/min | 1s |
NIBR | Industrial Blend Resin, Red | 17.4s, bottom 170s | 23.5s, bottom 230s | 100 mm/min | 1s |
NIBB | Industrial Blend Resin, Black | 18.1s, bottom 180s | 24.5s, bottom 240s | 100 mm/min | 1s |
NIBU | Industrial Blend Resin, Unp. | 15.9s, bottom 160s | 21.4s, bottom 210s | 100 mm/min | 1s |
CB | Castable Blend Resin, Red | 17.4s, bottom 170s | 23.5s, bottom 230s | 100 mm/min | 1s |
NSW | Snow White Resin, White | 17.4s, bottom 170s | 23.5s, bottom 230s | 100 mm/min | 1s |
DB | Deep Black Resin, Black | 18.9s, bottom 190s | 25.5s, bottom 250s | 100 mm/min | 1s |
AG | Ash Grey Resin, Grey | 17.4s, bottom 170s | 23.5s, bottom 230s | 100 mm/min | 1s |
NC | Nano Clear Resin, Clear | 21.2s, bottom 210s | 28.6s, bottom 290s | 100 mm/min | 1s |
DCH | Dentifix-3D Casting HR Resin, Green | 18.1s, bottom 180s | 24.5s, bottom 240s | 100 mm/min | 1s |
DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 19.7s, bottom 200s | 26.5s, bottom 260s | 100 mm/min | 1s |
DMHS | Dentifix-3D Modelling HR Resin, Sand | 20.4s, bottom 200s | 27.5s, bottom 270s | 100 mm/min | 1s |
DMHG | Dentifix-3D Modelling HR Resin, Grey | 20.4s, bottom 200s | 27.5s, bottom 270s | 100 mm/min | 1s |
DMHC | Dentifix-3D Modelling HR Resin, Clear | 21.9s, bottom 220s | 29.6s, bottom 300s | 100 mm/min | 1s |
DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 26.4s, bottom 260s | 35.7s, bottom 360s | 50 mm/min | 2s |