Download ready-to-print Chitubox profiles for the Hardlight Sirius Black Mono LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

SKU
Resin name
0.05 mm layer
0.1 mm layer
Speed
Delay
NNBR Standard Blend Resin, Red 1.8s, bottom 20s 2.4s, bottom 20s 100 mm/min 1s
NNBB Standard Blend Resin, Black 1.8s, bottom 20s 2.5s, bottom 20s 100 mm/min 1s
NNBU Standard Blend Resin, Unp. 1.6s, bottom 20s 2.2s, bottom 20s 100 mm/min 1s
NIBR Industrial Blend Resin, Red 1.8s, bottom 20s 2.4s, bottom 20s 100 mm/min 1s
NIBB Industrial Blend Resin, Black 1.8s, bottom 20s 2.5s, bottom 20s 100 mm/min 1s
NIBU Industrial Blend Resin, Unp. 1.6s, bottom 20s 2.2s, bottom 20s 100 mm/min 1s
CB Castable Blend Resin, Red 1.8s, bottom 20s 2.4s, bottom 20s 100 mm/min 1s
NSW Snow White Resin, White 1.8s, bottom 20s 2.4s, bottom 20s 100 mm/min 1s
DB Deep Black Resin, Black 1.9s, bottom 20s 2.6s, bottom 30s 100 mm/min 1s
AG Ash Grey Resin, Grey 1.8s, bottom 20s 2.4s, bottom 20s 100 mm/min 1s
NC Nano Clear Resin, Clear 2.1s, bottom 20s 2.9s, bottom 30s 100 mm/min 1s
DCH Dentifix-3D Casting HR Resin, Green 1.8s, bottom 20s 2.5s, bottom 20s 100 mm/min 1s
DM+ Dentifix-3D Modelling HR+ Resin, Grey 2s, bottom 20s 2.7s, bottom 30s 100 mm/min 1s
DMHS Dentifix-3D Modelling HR Resin, Sand 2.1s, bottom 20s 2.8s, bottom 30s 100 mm/min 1s
DMHG Dentifix-3D Modelling HR Resin, Grey 2.1s, bottom 20s 2.8s, bottom 30s 100 mm/min 1s
DMHC Dentifix-3D Modelling HR Resin, Clear 2.2s, bottom 20s 3s, bottom 30s 100 mm/min 1s
DGP Dentifix-3D Gingiva Mask FLEX, Pink 2.7s, bottom 30s 3.6s, bottom 40s 50 mm/min 2s