Download ready-to-print Chitubox profiles for the Anycubic Photon S LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

SKU
Resin name
0.05 mm layer
0.1 mm layer
Speed
Delay
NNBR Standard Blend Resin, Red 8.7s, bottom 90s 11.7s, bottom 120s 100 mm/min 1s
NNBB Standard Blend Resin, Black 9s, bottom 90s 12.2s, bottom 120s 100 mm/min 1s
NNBU Standard Blend Resin, Unp. 7.9s, bottom 80s 10.7s, bottom 110s 100 mm/min 1s
NIBR Industrial Blend Resin, Red 8.7s, bottom 90s 11.7s, bottom 120s 100 mm/min 1s
NIBB Industrial Blend Resin, Black 9s, bottom 90s 12.2s, bottom 120s 100 mm/min 1s
NIBU Industrial Blend Resin, Unp. 7.9s, bottom 80s 10.7s, bottom 110s 100 mm/min 1s
CB Castable Blend Resin, Red 8.7s, bottom 90s 11.7s, bottom 120s 100 mm/min 1s
NSW Snow White Resin, White 8.7s, bottom 90s 11.7s, bottom 120s 100 mm/min 1s
DB Deep Black Resin, Black 9.4s, bottom 90s 12.7s, bottom 130s 100 mm/min 1s
AG Ash Grey Resin, Grey 8.7s, bottom 90s 11.7s, bottom 120s 100 mm/min 1s
NC Nano Clear Resin, Clear 10.5s, bottom 110s 14.2s, bottom 140s 100 mm/min 1s
DCH Dentifix-3D Casting HR Resin, Green 9s, bottom 90s 12.2s, bottom 120s 100 mm/min 1s
DM+ Dentifix-3D Modelling HR+ Resin, Grey 9.8s, bottom 100s 13.2s, bottom 130s 100 mm/min 1s
DMHS Dentifix-3D Modelling HR Resin, Sand 10.2s, bottom 100s 13.7s, bottom 140s 100 mm/min 1s
DMHG Dentifix-3D Modelling HR Resin, Grey 10.2s, bottom 100s 13.7s, bottom 140s 100 mm/min 1s
DMHC Dentifix-3D Modelling HR Resin, Clear 10.9s, bottom 110s 14.7s, bottom 150s 100 mm/min 1s
DGP Dentifix-3D Gingiva Mask FLEX, Pink 13.2s, bottom 130s 17.8s, bottom 180s 50 mm/min 2s