Download ready-to-print Chitubox profiles for the Anycubic Photon LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.
SKU |
Resin name |
0.05 mm layer |
0.1 mm layer |
Speed |
Delay |
NNBR | Standard Blend Resin, Red | 19.3s, bottom 190s | 26.1s, bottom 260s | 100 mm/min | 1s |
NNBB | Standard Blend Resin, Black | 20.1s, bottom 200s | 27.2s, bottom 270s | 100 mm/min | 1s |
NNBU | Standard Blend Resin, Unp. | 17.6s, bottom 180s | 23.8s, bottom 240s | 100 mm/min | 1s |
NIBR | Industrial Blend Resin, Red | 19.3s, bottom 190s | 26.1s, bottom 260s | 100 mm/min | 1s |
NIBB | Industrial Blend Resin, Black | 20.1s, bottom 200s | 27.2s, bottom 270s | 100 mm/min | 1s |
NIBU | Industrial Blend Resin, Unp. | 17.6s, bottom 180s | 23.8s, bottom 240s | 100 mm/min | 1s |
CB | Castable Blend Resin, Red | 19.3s, bottom 190s | 26.1s, bottom 260s | 100 mm/min | 1s |
NSW | Snow White Resin, White | 19.3s, bottom 190s | 26.1s, bottom 260s | 100 mm/min | 1s |
DB | Deep Black Resin, Black | 21s, bottom 210s | 28.3s, bottom 280s | 100 mm/min | 1s |
AG | Ash Grey Resin, Grey | 19.3s, bottom 190s | 26.1s, bottom 260s | 100 mm/min | 1s |
NC | Nano Clear Resin, Clear | 23.5s, bottom 230s | 31.7s, bottom 320s | 100 mm/min | 1s |
DCH | Dentifix-3D Casting HR Resin, Green | 20.1s, bottom 200s | 27.2s, bottom 270s | 100 mm/min | 1s |
DM+ | Dentifix-3D Modelling HR+ Resin, Grey | 21.8s, bottom 220s | 29.4s, bottom 290s | 100 mm/min | 1s |
DMHS | Dentifix-3D Modelling HR Resin, Sand | 22.7s, bottom 230s | 30.6s, bottom 310s | 100 mm/min | 1s |
DMHG | Dentifix-3D Modelling HR Resin, Grey | 22.7s, bottom 230s | 30.6s, bottom 310s | 100 mm/min | 1s |
DMHC | Dentifix-3D Modelling HR Resin, Clear | 24.3s, bottom 240s | 32.8s, bottom 330s | 100 mm/min | 1s |
DGP | Dentifix-3D Gingiva Mask FLEX, Pink | 29.4s, bottom 290s | 39.6s, bottom 400s | 50 mm/min | 2s |