Download ready-to-print Chitubox profiles for the Anet N4 LCD 3D printer settings. Watch a video instruction on how to load profiles into the Chitubox slicer. To accurately calibrate print settings, use the FunToDo and Dentifix-3D calibration test.

SKU
Resin name
0.05 mm layer
0.1 mm layer
Speed
Delay
NNBR Standard Blend Resin, Red 12.4s, bottom 120s 16.7s, bottom 170s 100 mm/min 1s
NNBB Standard Blend Resin, Black 12.9s, bottom 130s 17.5s, bottom 170s 100 mm/min 1s
NNBU Standard Blend Resin, Unp. 11.3s, bottom 110s 15.3s, bottom 150s 100 mm/min 1s
NIBR Industrial Blend Resin, Red 12.4s, bottom 120s 16.7s, bottom 170s 100 mm/min 1s
NIBB Industrial Blend Resin, Black 12.9s, bottom 130s 17.5s, bottom 170s 100 mm/min 1s
NIBU Industrial Blend Resin, Unp. 11.3s, bottom 110s 15.3s, bottom 150s 100 mm/min 1s
CB Castable Blend Resin, Red 12.4s, bottom 120s 16.7s, bottom 170s 100 mm/min 1s
NSW Snow White Resin, White 12.4s, bottom 120s 16.7s, bottom 170s 100 mm/min 1s
DB Deep Black Resin, Black 13.5s, bottom 130s 18.2s, bottom 180s 100 mm/min 1s
AG Ash Grey Resin, Grey 12.4s, bottom 120s 16.7s, bottom 170s 100 mm/min 1s
NC Nano Clear Resin, Clear 15.1s, bottom 150s 20.4s, bottom 200s 100 mm/min 1s
DCH Dentifix-3D Casting HR Resin, Green 12.9s, bottom 130s 17.5s, bottom 170s 100 mm/min 1s
DM+ Dentifix-3D Modelling HR+ Resin, Grey 14s, bottom 140s 18.9s, bottom 190s 100 mm/min 1s
DMHS Dentifix-3D Modelling HR Resin, Sand 14.6s, bottom 150s 19.6s, bottom 200s 100 mm/min 1s
DMHG Dentifix-3D Modelling HR Resin, Grey 14.6s, bottom 150s 19.6s, bottom 200s 100 mm/min 1s
DMHC Dentifix-3D Modelling HR Resin, Clear 15.6s, bottom 160s 21.1s, bottom 210s 100 mm/min 1s
DGP Dentifix-3D Gingiva Mask FLEX, Pink 18.9s, bottom 190s 25.4s, bottom 250s 50 mm/min 2s