Welcome to the Fun To Do Website,
The home of the affordable 3D resins.
FunToDo Resins celebrates its
5th year anniversary!
Leading in 3D printer resins since 2013
In 2013 FunToDo Resins started as one of the first 3-D printer resin producers in a brand new market. Sailing uncharted waters, we developed our first product: FunToDo Standard Blend, in two colours.
Now 5 years later we have grown from a few hundred kilo’s in our first year, to a yearly production of well over 20.000 Kg. This despite a global shortage of raw materials.
Today, our Standard Blend still is one of the most popular blends in our ever expanding product line.
Starting with a few enthusiastic distributors in a couple of emerging markets, we are now represented in more than 45 countries all over the world. Most of these countries have a distributor carrying our full range.
As a leading 3-D printer resin company we have grown from one resin blend in 2013, to twelve unique resin blends in 2018, all available in several colours and/or versions.
Thanks to our own Research and Development department and production facility, FunToDo Resins takes a leading position in the development of new resins. Besides research and the development of new resins, we also produce bespoke resins for a number of high-end printer manufacturers from all over the world.
To celebrate our 5th anniversary we bring you three Jubilee Sample Kits.
Especially for this promotion, we want to introduce you to TEK1960, the user friendly print cleaner from Keytech. Their products, TEK1960 and TEK1969 are both cleaners with a far less harmful and far less aggressive composition than IPA and other solvents currently in the market. The Keytech products are especially useful in combination with a sonic bath. It can be used over and over again to clean your prints. When it gets dirty, just strain it through a paper coffee filter, and your cleaner is as good as new!
Aside from an unique opportunity to try out our most popular blends, it is also the ideal gift pack for the coming holidays!
The three Jubilee Sample Kits come fully loaded!
250ml NextGen SW, 250ml Ash Grey, 250ml Deep Black, plus a Gold FunToDo 8Gb USB stick and a FEP film (13x19cm) - Price: €45,-
Order code: FTD-S/D/A
250ml Ash Grey, 250ml Deep Black, 250ml TEK1960, plus a Gold FunToDo 8Gb USB stick and a FEP film (13x19cm) - Price €42,50
Order code: FTD-A/D/T
250ml Dentifix-3D Modelling Sand, 250ml Dentifix-3D Modelling Grey, 250ml TEK1960, plus a Gold Dentifix-3D 8Gb USB stick, and a FEP film (13x19cm) – Price: €45,-
Order code: DFM-S/G/T
The contents of the available Sample kits vary on a regular basis, so please contact your local distributor/reseller for the availability of the sample kits in your area .
FTD Sample Kit SW,AG,DB
FTD Sample Kit AG,Tek,DB
Dentifix-3D Kit Grey,Tek,Sand
(all prices are excl. shipping, and local taxes)
FunToDo Next Generation
The FunToDo Next Generation Products.
Because of the world wide shortage of some of our ingredients, we haven't been able to supply our distributors and resellers all over the world with the full range of our products.
The last few months we have been busy developing alternative formulas. These new formulas use ingredients that we can source from other countries besides China.
This way we can circumvent shortages that might appear in future times.
With these new formulations we have tried to copy the properties of our existing products, but the properties of the new formulas, although similar, are not the same.
Some of the NxtGen products are stronger, some of the products are faster on one machine, and the same, or perhaps a bit slower at a certain layer thickness, on another machine.
The Hardness is similar, around 80 shore D. We have made the viscosity slightly higher at around 85-90mpas at 20C, otherwise the exposure times would be too short for most machines.
NxtGen Snow White has a yellow undertone when first printed. Because of the photobleaching properties of some of its ingredients, after being fully cured, the print becomes the white you are used to.
Although the prices of all the ingredients have gone up in the world market, we have been able to keep our prices at the same level for the fifth year in a row!
When shortages are over, we will have two similar products!
NxtGen Snow White and Snow White Classic.
PDMS Repair Kit
Many High End printers (like the Formlabs machines, the B9 etc.) come with a PDMS layer in their VAT (or Tank) which prevents the print from sticking to the VAT bottom while printing.
Over time, after several prints, this layer gets less transparent at places where prints have been build. This phenomenon, also known as “Ghosting” makes printing less efficient, less “crisp”. This is normal wear and tear. But once this happens, you have to buy a new Vat/Tank. This will easily costs you about €60,- With our new PDMS Repair Kit you can replace this old PDMS layer of your VAT/Tank with a new one, for only a fraction of the price of a new Tank!
The Repair Kit can replace about 2-4 linings (depending on the machine and thickness of the layer)
Recommended retail price €21,-
(all prices ex taxes & shipping)
- Broad range of wavelengths
- Suitable for laser, Dlp, Led systems
- Ultra short exposure time
- Low shrinkage
- Hard, Soft and castable types
- High Chemical resistance
- Range of colours
Various bespoke resins have been developed by us to suit the specific needs of customers.
Are you in need of a SLA or DLP resin with special properties? Please let us know.